Mini Encapsulated - with screw terminals (3-Day Power Supply)
Linear Regulated Power Supplies

AC-DC single output

SPECIFICATIONS

Input Voltage: 105-125 VAC, 47 to 420 Hz, single phase.

Output Voltage Setting: Outputs are factory preset to within ±2% (1 to 9 volt models) or ±1% (10 to 75 volt models) of the nominal output voltage.

T/C terminal: The T/C terminal can be used to trim the output more precisely to the nominal voltage rating by connecting an external resistor from the T/C terminal to either the + or - terminal.

Polarity: Either positive or negative terminal may be grounded.

Ambient Operating Temperature: -20 to +71°C. No derating required.

Storage Temperature: -55 to +85°C.

Temperature Coefficient: From 9 to 75 volts, typically 0.015%/°C; 1 to 8 volts, 0.03%/°C.

Impedance: 0.07 ohms at 1 kHz and 0.2 ohms at 10 kHz (approx.)

Size and Weight:

Case   | Rough               |   Approx.
Size   | Dimensions (inches) |   Weight
-------|---------------------|-------------
EB-10      1.4 x 2.5 x 3.5       15 oz.
-------------------------------------------
EB-13      1.6 x 2.5 x 3.5     1 lb. 4 oz.
-------------------------------------------
EB-20      2.4 x 2.5 x 3.5     2 lb. 1 oz.
-------------------------------------------

See Drawing for exact dimensions.
Mounting: Threaded mounting holes permit mounting to a chassis, cabinet wall or bracket, or they may be used on a test bench or tabletop. To mount from the power supply side of the mounting surface, use accessory Mounting Kit EB4A. When DIN rail mounting is desired, use accessory Mounting Kit EB35DIN.

[HOME] [MINI WITH SCREW TERMINALS Linear- MAIN SCREEN]