Made in USA - Always has been. Always will be. Made In The USA
Buy Direct From Acopian

DC-DC Converters (3-Day Power Supply)
Regulated Power Supplies

Mini Encapsulated - with Screw Terminals
single output & dual tracking outputs
(5Vdc in to 28Vdc in)


Input Voltage: Nominal voltage ±10%.

Input Reflected Ripple: 1% Ein (max.)

Output Ripple (@ 25 MHz bandwidth):
1 mV rms, 50 mV p-p (5-15V outputs)
1.5 mV rms, 75 mV p-p (18-28V outputs)

Output Voltage Setting: Outputs are factory preset to within ±1% of the nominal output voltage.

T/C terminal: For single output models, the T/C terminal can be used to trim the output more precisely to the nominal voltage rating by connecting an external resistor from the T/C terminal to either the + or - terminal. For dual output models, the T/C terminal is the output common.

Polarity: The output of single output models may be connected in either polarity. Dual output models have a positive/common/negative output terminal configuration.

Transient Response (NL-FL): 50 microseconds.

Overload/Short Circuit Protection: Electronic current limiting with automatic recovery. All models have thermal protection with automatic reset.

Input/Output Isolation:
Voltage: 500 Vdc
Resistance: 100 megohms
Capacitance: 100 pF

Switching Frequency: 20 kHz minimum.

Temperature Coefficient: 0.02%/°C. (Typical).

Ambient Operating Temperature: -20 to +71°C.

Storage Temperature: -40 to +85°C.

Humidity: 20% to 80% R.H. (non-condensing).

Size and Weight:

Case   | Rough               |  Approx. 
Size   | Dimensions (inches) |  weight 
EBC-10     1.4 x 2.5 x 3.5        14 oz.

See Drawing for exact dimensions.

Mounting: Threaded mounting holes permit mounting to a chassis, cabinet wall or bracket, or they may be used on a test bench or tabletop. To mount from the power supply side of the mounting surface, use accessory Mounting Kit EB4A. When DIN rail mounting is desired, use accessory Mounting Kit EB35DIN.