AC-DC & DC-DC POWER SUPPLIES
Built AND SHIPPED WITHIN 3 DAYS
Made in USA - Always has been. Always will be. Made In The USA

DC to DC Converters
Regulated Power Supplies

Mini Encapsulated - with touch safe terminal blocks
single output

SPECIFICATIONS

Input Voltage: 9-18 Vdc.

Output Ripple (@25 MHz bandwidth): < 1% or 50 mV p-p.

Output Voltage Setting: Outputs are factory preset to within ±1% of the nominal output voltage.

T/C Terminal: The T/C terminal can be used to trim the output more precisely to the nominal voltage rating by connecting an external resistor from the T/C terminal to either the + or terminal.

Polarity: The output may be connected in either polarity.

Transient Response (NL-FL): 50 microseconds.

Overload/Short Circuit Protection: Electronic current limiting with automatic recovery. All models have thermal protection with automatic reset.

Input/Output Isolation: 500 Vdc.

Switching Frequency: 200 kHz minimum.

Temperature Coefficient: 0.02%/C (Typical).

Ambient Operating Temperature: 20 to +71C.

Storage Temperature: 40 to +85C.

Humidity: 10% to 95% ≤40C R.H. (non-condensing).

Size and Weight:

Case   | Rough               |  Approx. 
Size   | Dimensions (inches) |  weight 
-------|---------------------|-------------
ABC-13   1.53 x 2.53 x 3.53     15 oz.
-------------------------------------------

See Drawing for exact dimensions.

Mounting: Threaded mounting holes permit mounting to a chassis, cabinet wall or bracket, or they may be used on a test bench or tabletop. When wall-mounting or DIN rail mounting is desired, use accessory Mounting Kits.