Gold Box
(3-Day Power Supply)
Linear Regulated Power Supplies
AC-DC wide adjust output
(fixed and adjustable current limiting)
Specifications
Input Voltage: 105-125 VAC, 50-400 Hz, single phase.
Regulation, Ripple (constant voltage operation):
Load Regulation: ±0.005% or 2 mV, whichever is greater.
Line Regulation: ±0.005% or 2 mV, whichever is greater.
Ripple: 0.25 mV rms.
Regulation, Ripple (constant current operation):
Load Regulation: ±0.2% or 5 mA.
Line Regulation: ±0.1% or 2 mA.
Ripple: 0.1% rms.
Remote Voltage Sensing: Provision for sensing the output voltage across the load, to
compensate voltage drops in output wiring, is a standard feature.
Remote Voltage Programming: The output voltage of all models may be controlled by means
of external resistance connected in series with the -S lead.
Voltage Programming Coefficient: See Output Specs. Calibration tolerance, ±2%.
Current Limiting: Models with fixed current limiting have a rolloff characteristic with automatic
recovery. All others have current limiting with a constant-voltage/constant-current crossover
characteristic.
Polarity: Output is floating; either positive or negative terminal may be grounded or floated up to
300 volts above ground.
Temperature Coefficient: 0.015%/°C(Typical).
Ambient Operating Temperature: -20 to +71°C.
Storage Temperature: -55 to +85°C.
Size and Weight:
Case | Rough | Approx.
Size | Dimensions (inches) | weight
-------|---------------------|--------------
M6 3.4 x 5.1 x 7.2 5 lb. 5 oz.
--------------------------------------------
M9 3.4 x 5.1 x 9.8 6 lb. 3 oz.
--------------------------------------------
M13 3.4 x 5.1 x 13.8 8 lb. 3 oz.
--------------------------------------------
H11 5.1 x 7.4 x 12.0 12 lb. 14 oz.
--------------------------------------------
H16 5.1 x 7.4 x 16.8 17 lb. 12 oz.
--------------------------------------------
See Drawing for exact dimensions.
Mounting: Threaded mounting holes permit mounting to a chassis,
cabinet wall or bracket, or they may be used on a test bench or tabletop.
To mount from the power supply side of the mounting surface, use accessory
Mounting Kit GB8 (see Accesssory Mounting Kits). To mount on a DIN rail,
see Accesssory Mounting Kits.