1U Switching Regulated Power Supplies

1U Switching Regulated Power Supplies
RACK MOUNTING & BENCHTOP

Switching Power Supplies (to 750 watts)
Power Factor Correction and Universal Input

AC-DC wide adjust output
with optional auxiliary output (to 180 watts)


OPTIONS   HOW TO ORDER

DIO1: Ethernet/USB/RS232 Digital Interface.....$300
Can be used to monitor and/or control output voltage and current. Includes isolated Ethernet (10/100 Mbps), RS232, and USB (RS485 option “DIO2” available) interfaces, utilizing 16 bit DAC and ADC. This option incorporates the “E” (Enable) option. (Not available with G1, DIO2, or Auxiliary Output options.) Download Instruction Sheet & Drivers

DIO2: Ethernet/USB/RS232/RS485 Digital Interface.....$330
Can be used to monitor and/or control output voltage and current. Includes isolated Ethernet (10/100 Mbps), RS232, RS485 and USB interfaces, utilizing 16 bit DAC and ADC. This option incorporates the “E” (Enable) option. (Not available with G1, DIO1, or Auxiliary Output options.) Download Instruction Sheet & Drivers

C1: Front Panel Adjust: ...........$50
Voltage and current adjustment knobs available on front panel. (Not available with Auxiliary Output.)

C5: 0-5v Programming (instead of the standard 0-10v Programming) ...........$40
Output voltage and current of standard models may be programmed from 0 to full rating by means of control voltage inputs of 0 to +10Vdc. (Voltage mode accuracy: 1%. Current mode accuracy: 5%. Accuracy percentages do not apply below 5% of output rating.)

E: Output Enable: ............$0
To enable the DC output, the Inhibit terminal must be tied to the -DC output. An open collector or contact closure can be used.

E1: Output Blocking Protection Diode ...........$15
Used for battery charging applications. Derate output by 10%. (Not available with N or P options.)

F: Moisture/Fungus Proofing ...........$50
Can be furnished with a moisture and fungus resistant varnish applied to interior surfaces.

H: Handles ............$15

M: Bus Bar Cover ...........$20
Protects exposed terminals from contact.

M3: Digital Voltage and Current Meters ...........$120
(Not available with C5 or C6 options.)

S: Chassis Slides ...........$90
For racks having rear mounting rails spaced 18” to 24” behind the front panels. (Rack Mounting models only.)

Auxiliary Output: Choose desired voltage from the ‘Optional Auxiliary Output’ table for the Rack Mounting Models or the Benchtop Models. To order, use the ‘Model’ column to determine suffix and see the Rack Mounting Models or the Benchtop Models for cost increase. (Not available with DIO1, DIO2, or C1 option.)

[HOME] [1U Switching (PFC and Universal Input) - MAIN SCREEN]